lococube® accessory

Filter
New
Connection Cable VK-46
For lococube® miCon-L & open source programmingTTL232 -> USBISP -> USBCompatible with the following BARTH® lococube® mini-PLCs:STG-500, STG-580, STG-700, STG-800, STG-810, STG-820, STG-850, STG-950, MC-800, GT-900, GT-950Incl. STLINK-V3MINIE + USB-C cable (0.3 m) Manua VK-46 (EN)

€59.00*
New
Harness KS-85
You always get right down to business? No time to waste? We hear you! This harness lets you jump straight into development: Easily connect two BARTH-devices to each other and a power supply (sold seperately)CAN lines are properly terminated (60 Ohm) out of the box. The termination resistor can be unplugged easily & reversiblyClip-on connectors allow for easy connection of your own hardware, test equipment or another harness (KS-85 or other)

€69.00*
Connection Cable VK-16
For lococube® miCon-L ProgrammingIntegrated TTL232/USB ConverterCable Length: 1.5mCable Color: black Manual VK-16 (EN) Windows® Driver VK-16

€39.00*
Programmer ST-Link/V2 ISOL
For lococube® STG-8xx Open Source ProgrammingIntegrated opto-IsolationConnection Cable VK-35 is mandatory

€99.00*
Connection Cable VK-35
For lococube® Open Source Programming with ST-LinkSuitable for all STG-8xx and DMA-xxLength: 180 mm

€19.00*
Connection Cable VK-10 + USB Adapter
For lococube® miCon-L Programming of STG-500

€33.50*
Bracket HA-18 for lococube®
35mm DIN Rail Mounting BracketIdeal for Cabinet MountingBoth horizontal and vertical OrientationSolid PMMA Mounting PlateScrews for lococube® includedSuitable for: STG-850/680 3D Data (PDF and STEP)

€9.50*
Bracket HA-27 for lococube®
35mm DIN Rail Mounting BracketIdeal for Cabinet MountingBoth horizontal and vertical OrientationSolid PMMA Mounting PlateScrews for lococube® includedSuitable for: STG-500

€8.50*
Bracket HA-30 for lococube®
35mm DIN rail mounting setSuitable for all locoube® mini-PLC, motion and interfaceEasy and fast frontside mountingMaterial: stainless steel A2Suitable for: STG-800/810/820/850, STG-580/680, MC-800, GT-800

€3.20*
Gasket SEA-24 for DMA-15
Double-sided adhesive gasket designed to be mounted onto the DMA-15 to make the front side IP65 safe.

€4.75*