You are eager to unleash the full potential of your Briggs and Stratton Vanguard Lithium Battery but don´t want to fuss around with a soldering iron all day?

We have you covered with our plug-and-play harness for battery evaluation. It allows for connecting a load, charger and keyswitch to the battery and using all of its powerful basic functionality.

BARTH® wiring products enable you to integrate Briggs and Stratton Vanguard Lithium Batteries effortlessly.

No matter if you just want to sample a battery or need a modular solution for electrifiying an existing system: We have you covered with a variety of rugged, UL-certified lococube® CAN-Bus PLCs and highly modular wiring solutions.



Number: 22 products
Accessory Harnes TKB-916

Accessory Harness, that is used in conjunction with the Integrator Harness KB-950, as an extension for the "customer use" plug.
- Rated voltage: 72 V DC
- Length overall (including connectors): 1120 mm (+- 50 mm)
- IP-rating: IPx7
- Weight: 0.280 kg

80,00 €
RRP excl. VAT.*
Accessory Harness TKB-902

Accessory harness to connect a load to main application harness HKB-950:
- Current carrying capability @ 100% duty: 400A
- Rated voltage: 72 V DC
- Connector application side: Ring cable lug for M8 bolt
- Length overall (including connectors): 1050 mm (+- 50 mm)
- IP-rating: IPx7
- Weight: 1.75 kg

199,00 €
RRP excl. VAT.*
Accessory Harness TKB-903
Accessory harness to connect a charger that is located outside of the machine to main harness HKB-950
- Current carrying capability @ 100% duty: 50A
- Rated voltage: 72 V DC
- Connector application side: Ring cable lug for M6 bolt
- Length overall (including connectors): 5200 mm (+- 50 mm)
- IP-rating: IPx7
- Weight: 2,1 kg
379,00 €
RRP excl. VAT.*
Accessory Harness TKB-904
Accessory harness for all charging applications (battery side connector), to be used in conjunction with main harness HKB-950
- Current carrying capability @ 100% duty: 50A
- Rated voltage: 72 V DC
- Connector battery side: Ring cable lug for M8 bolt
- Length overall (including connectors): 1200 mm (+- 50 mm)
- IP-rating: IPx7
- Weight: 0.5 kg
99,00 €
RRP excl. VAT.*
Accessory Harness TKB-905
Accessory harness for all charging applications (machine side connector), to be used in conjunction with main harness HKB-950
- Current carrying capability @ 100% duty: 50A
- Rated voltage: 72 V DC
- Length overall (including connectors): 2200 mm (+- 50 mm)
- IP-rating: IPx7
- Weight: 1.0 kg
249,00 €
RRP excl. VAT.*
Accessory Harness TKB-906
Accessory harness to activate the 12V source of the battery with a switch
- Rated voltage: 72 V DC
- Connector for switch: Isolated receptacle for 6,3mm spade terminals
- Length overall (including connectors): 800 mm (+- 50 mm)
- IP-rating: IPx7
- Weight: 0.05 kg
29,00 €
RRP excl. VAT.*
Accessory Harness TKB-907
Accessory harness to activate the main output (48V) of the battery with a switch
- Rated voltage: 72 V DC
- Harness supports illuminated (key-)switches (only LED-type with dropper resistor for 5V)
- Connector for switch: Isolated receptacles for 6,3mm spade terminals
- Length overall (including connectors): 800 mm (+- 50 mm)
- IP-rating: IPx7
- Weight: 0.05 kg
29,00 €
RRP excl. VAT.*
Accessory Harness TKB-908

Accessory harness including a STG-800 PLC to fully automate your application. Features:
- PLC is supplied by internal 12V source of battery
- PLC can switch the battery-output and various other loads
- PLC can read CAN-bus messages (like state of charge, current, voltage, etc.) and switch accordingly
- Length overall (including connectors): 800 mm (+- 50 mm)
- IP-rating: IPx7
- Weight: 0.25 kg

For more information on PLC-specifications please see the related product page. Thank you!

139,00 €
RRP excl. VAT.*
Accessory Harness TKB-909
Accessory harness including display DMA-15 to display various CAN-data of the battery like:
- State of charge (SOC)
- System voltage
- System current
- Battery temperature

Ready to use with the display already connected out of the box
- Length overall (including connectors): 800 mm (+- 50 mm)
- IP-rating: IPx7 (only with gasket for display, gasket included)
- Weight: 0.15 kg
219,00 €
RRP excl. VAT.*
Accessory Harness TKB-912

Accessory Harness, that is used in conjuction with the Integrator Harness KB-950, as an end piece to the E-Stop connection.
- Rated voltage: 72 V DC
- Length overall (including connectors): 0770 mm (+- 50 mm)
- IP-rating: IPx7
- Weight: 0.102 kg

45,00 €
RRP excl. VAT.*
Accessory Harness TKB-913

Accessory Harness, that is used in conjuction with the Integrator Harness KB-950, as an end piece to the "Customer Use" connection.
- Rated voltage: 72 V DC
- Connector for switch: Isolated receptacle for 6.3 mm spade terminals.
- Length overall (including connectors): 0750 mm (+- 50 mm)
- IP-rating: IPx7
- Weight: 0.146 kg

75,00 €
RRP excl. VAT.*
Accessory Harness TKB-914

Accessory Harness, that is used in conjuction with the Integrator Harness KB-950, as an extension for the charging plug.
- Rated voltage: 72 V DC
- Length overall (including connectors): 1120 mm (+- 50 mm)
- IP-rating: IPx7
- Weight: 0.128 kg

60,00 €
RRP excl. VAT.*
  1. 1
  2. 2