lococube® CAN Display DMA-15

Product information "lococube® CAN Display DMA-15"
  • Tiny and compact CAN Display
  • Color Touch TFT 2.4“ 240×320p
  • White LED Backlight
  • Design Template Selection via CAN
  • No Programming necessary
  • Open Source Programming Option
  • Compatible with all CAN lococubes®´s
  • Front IP65 Protection Grade (option)
  • Panel-Mount without visible Screws
  • Panel Cut-Out (LxW): 60 × 45 mm
  • Dimensions (LxW): 69 × 50 mm
  • Operating Voltage 7 to 32 VDC
  • Engineered and manufactured in Germany
CAN Interface: 1
Display Size: 2.4"
Panel Mount: yes
SD Slot: no
Touch Screen: yes

Accessories

lococube® mini-PLC STG-800
High-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 25 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Comprehensive Fail Safe FunctionsProgrammable Status LEDTTL-232 3.3V InterfaceIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Wide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UKCA, ECE-R10, UL, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-800/STA-800 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Arm Legacy Compiler v5 Guide (EN) Sample Programs KEIL® for STG-800 3D-Data (PDF and STEP)

From €86.00*
New
Harness KS-85
You always get right down to business? No time to waste? We hear you! This harness lets you jump straight into development: Easily connect two BARTH-devices to each other and a power supplyCAN lines are properly terminated (60 Ohm) out of the box. The termination resistor can be unplugged easily & reversiblyClip-on connectors allow for easy connection of your own hardware, test equipment or another harness (KS-85 or otherIncl. power supply 25 W, 12 V, 2.08 A

€69.00*
Gasket SEA-24 for DMA-15
Double-sided adhesive gasket designed to be mounted onto the DMA-15 to make the front side IP65 safe.

€4.75*
Programmer ST-Link/V2 ISOL
Replaced by VK-46 for the following BARTH® lococube® products:STG-500, STG-580, STG-700, STG-800, STG-810, STG-820, STG-850, STG-950, MC-800, GT-800, GT-900, GT-950, GT-960 For lococube® STG-8xx Open Source ProgrammingIntegrated opto-IsolationConnection Cable VK-35 is mandatory

€99.00*
Connection Cable VK-35
Replaced by VK-46 for the following BARTH® lococube® products:STG-500, STG-580, STG-700, STG-800, STG-810, STG-820, STG-850, STG-950, MC-800, GT-800, GT-900, GT-950, GT-960 For lococube® Open Source Programming with ST-LinkSuitable for all STG-8xx and DMA-xxLength: 180 mm

€19.00*

Customers also bought

lococube® mini-PLC STG-850
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®6 analog Inputs 0 to 30 VDC, 12 bit ADC4 digital InputsEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs8 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 1 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)IrDA/SIR InterfaceTTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UKCA, ECE-R10, UL und RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 93x45x15mmWeight: 80g Manual STG-850 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Arm Legacy Compiler v5 Guide (EN) Sample Programs KEIL® for STG-850 3D-Data (PDF and STEP)

From €104.00*
lococube® mini-PLC STG-680
Small & universal MODBUS Logic Controller6 analog Inputs 0..10 VDC, 12 bit ADC4 digital Inputs up to 1 kHz8 Power Outputs up to 1.5 A1 Power PWM Output 2 A/1 to 10 kHz1 MODBUS RTU InterfaceGraphically programmable MODBUS DataReliable Solid-State OutputsFail Safe OscillatorProgrammable Status LEDTTL-232/USB Connection to PCIntuitive graphical Programming CapabilityWide Operating Voltage Range 7..32 VDCWide Operating Temp. Range -40..+60°CUltraflat Housing, Height 11 mmVibration resistant and rugged SealingCE, UCKA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 93x45x15mmWeight: 80g Manual STG-680 (EN) Drawing for STG-680 3D-Data (PDF and STEP) for STG-680

From €136.00*
lococube® mini-PLC STG-500
3 analog Inputs 0..30 VDC2 digital Inputs up to 1 kHz4 Power Outputs up to 1.5 A1 Power PWM Output 2 A/1..5 kHzReliable Solid-State OutputsProgrammable Status LEDRS232 Connection to PCIntegrated Temperature SensorIntuitive graphical Programming Capability (VK-10 + USB Adapter required)Wide Operating Voltage Range 7..32 VDCWide Operating Temp. Range -40..+70°CVibration resistant and rugged SealingVery low Current ConsumptionUniversal Aluminium Mounting PlateCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 40x40x22mmWeight: 50 Manual STG-500 (EN) Drawing STG-500 3D-Data (PDF and STEP)

From €126.00*
lococube® CAN Display DMA-20
Universal CAN DisplayColor Touch TFT 2.4“ 240×320pLED BacklightDesign Template Selection via CANNo Programming necessaryOpen Source Programming OptionCompatible with all CAN lococube®´sIntegrated Piezo SpeakerFront IP65 Protection Grade (option)Panel-Mount without visible ScrewsPanel Cut-Out (LxW): 106 × 78 mmDimensions (LxW): 115 × 85 mmOperating Voltage 7 to 32 VDCEngineered and manufactured in GermanyDimensions (LxWxT): 115x85x41mmPanel cut-out (LxW): 106x78mmWeight: 200g Manual DMA-20 (EN) Sample Projects miCon-L and C for DMA-15

From €146.00*
lococube® Motor Controller MC-800
Ultracompact CAN Motor ControllerSuitable for all bipolar Stepper Motors up to 2.8ANo Programming necessaryParameter communication via CANDynamic motor current adjustment via CANSpeed and ramps freely configurableStep mode dynamically adjustableInputs for Encoder and Limit SwitchesWide Operating Voltage Range 7 to 32VDCCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x18mmWeight: 50g Manual MC-800 (EN) Sample Project miCon-L MC-800 for STG-800

From €102.00*