miCon-L
What is miCon-L?
miCon-L is a graphical programming software for BARTH® lococube® mini-PLC of the STG series. In miCon-L, function blocks which include technical signs and symbols, are connected into networks.
Programming
In miCon-L, function blocks are connected data-flow oriented, forming a block diagram. The application is then downloaded onto the mini-PLC and translated into machine-readable code.
The logic processing and high recognizability of function blocks, make starting out with miCon-L easy and approachable. Knowing a programming language is not required. The design of the function blocks is based on exisiting graphical specifications and technical languages.
Structure blocks allow a hierarchical structure of projects. By adding a exporting projects, existing structure blocks can easily be reused.
Simulation, Test, and Run Mode
In Simulation mode, the application can be debugged and checked for errors, without needing to connect a mini-PLC.
After the network of structure and function blocks is designed, it can be downloaded onto the BARTH® lococube® mini-PLC. The application can be monitored and debugged in real time. Special visualization blocks allow monitoring of transmitted signals and their values, aiding in debugging and error checking.
What is miCon-L?
miCon-L is a graphical programming software for BARTH® lococube® mini-PLC of the STG series. In miCon-L, function blocks which include technical signs and symbols, are connected into networks.
Programming
In miCon-L, function blocks are connected data-flow oriented, forming a block diagram. The application is then downloaded onto the mini-PLC and translated into machine-readable code.
The logic processing and high recognizability of function blocks, make starting out with miCon-L easy and approachable. Knowing a programming language is not required. The design of the function blocks is based on exisiting graphical specifications and technical languages.
Structure blocks allow a hierarchical structure of projects. By adding a exporting projects, existing structure blocks can easily be reused.
Simulation, Test, and Run Mode
In Simulation mode, the application can be debugged and checked for errors, without needing to connect a mini-PLC.
After the network of structure and function blocks is designed, it can be downloaded onto the BARTH® lococube® mini-PLC. The application can be monitored and debugged in real time. Special visualization blocks allow monitoring of transmitted signals and their values, aiding in debugging and error checking.
Download
miCon-L 3.8.1
|
miCon-L 3.8
|
miCon-L 3.7
|
miCon-L 3.6.1
|
miCon-L 3.5
|
miCon-L 3.4
|
miCon-L 3.3.1
|
Download
|
Version
|
Date
|
Description
|
|
17.12.2021 |
WCU860S support, maintenance and corrections |
|
01.10.2018 |
STG-860 support (48V-Controller), replaces the preview version |
|
02.11.2017 |
STG-820 and STG-850 support |
|
06.03.2017 |
Bugfix: STG-800 (FlowChart) + extension project Lib-Test, STG-800 support |
|
03.08.2016 |
STG-580 MOD and STG-680 MOD now support MODBUS, STG-700 has a stepper motor controller |
|
19.05.2016 |
Support of the STG-32 and driver setup available, Note: the RS232 driver can be found in the folder miCon-L -> SETUP -> USBdriver |
|
23.10.2015 |
A new CAN function block library V2.0 (CAN 2.0B with 28 Bit Identifier) has been integrated in miCon-L, Note: You can use the new CAN library only with a compatible version of the STG-550 or STG-650 |
