lococube® mini-PLC STG-580

Product information "lococube® mini-PLC STG-580 "
  • 3 analog Inputs 0..10 VDC, 12 bit ADC
  • 2 digital Inputs up to 1 kHz
  • 4 Power Outputs up to 1.5 A
  • 1 Power PWM Output 2 A/1 to 10 kHz
  • 1 MODBUS RTU Interface
  • Graphically programmable MODBUS Data
  • Reliable Solid-State Outputs
  • Fail Safe Oscillator
  • Programmable Status LED
  • TTL-232/USB Connection to PC
  • Intuitive graphical Programming Capability
  • Wide Operating Voltage Range 7..32 VDC
  • Wide Operating Temp. Range -40..+60°C
  • Ultraflat Housing, Height 11 mm
  • Vibration resistant and rugged Sealing
  • CE, UKCA, and RoHS certified
  • Engineered and manufactured in Germany
  • Dimensions (LxWxH): 60x45x15mm
  • Weight: 50g

Analog Input: 3
Analog Output: 0
CAN Interface: 0
Digital Input: 2
Digital Output: 4
MODBUS Interface: 1
PWM Output: 1

miCon-L programming

Connection Cable VK-16
Replaced by VK-46 for the following BARTH® lococube® products:STG-500, STG-580, STG-700, STG-800, STG-810, STG-820, STG-850, STG-950, MC-800, GT-800, GT-900, GT-950, GT-960 For lococube® miCon-L ProgrammingIntegrated TTL232/USB ConverterCable Length: 1.5mCable Color: black Manual VK-16 (EN) Windows® Driver VK-16

€39.00*
New
Harness KS-85
You always get right down to business? No time to waste? We hear you! This harness lets you jump straight into development: Easily connect two BARTH-devices to each other and a power supplyCAN lines are properly terminated (60 Ohm) out of the box. The termination resistor can be unplugged easily & reversiblyClip-on connectors allow for easy connection of your own hardware, test equipment or another harness (KS-85 or otherIncl. power supply 25 W, 12 V, 2.08 A

€69.00*

Mounting

Bracket HA-30 for lococube®
35mm DIN rail mounting setSuitable for all locoube® mini-PLC, motion and interfaceEasy and fast frontside mountingMaterial: stainless steel A2Suitable for: STG-800/810/820/850, STG-580/680, MC-800, GT-800

€3.20*

Customers also bought

lococube® mini-PLC STG-800
High-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 25 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Comprehensive Fail Safe FunctionsProgrammable Status LEDTTL-232 3.3V InterfaceIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Wide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UKCA, ECE-R10, UL, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-800/STA-800 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Arm Legacy Compiler v5 Guide (EN) Sample Programs KEIL® for STG-800 3D-Data (PDF and STEP)

From €86.00*
lococube® mini-PLC STG-850
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®6 analog Inputs 0 to 30 VDC, 12 bit ADC4 digital InputsEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs8 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 1 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)IrDA/SIR InterfaceTTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UKCA, ECE-R10, UL und RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 93x45x15mmWeight: 80g Manual STG-850 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Arm Legacy Compiler v5 Guide (EN) Sample Programs KEIL® for STG-850 3D-Data (PDF and STEP)

From €104.00*
lococube® CAN Display DMA-15
Tiny and compact CAN DisplayColor Touch TFT 2.4“ 240×320pWhite LED BacklightDesign Template Selection via CANNo Programming necessaryOpen Source Programming OptionCompatible with all CAN lococubes®´sFront IP65 Protection Grade (option)Panel-Mount without visible ScrewsPanel Cut-Out (LxW): 60 × 45 mmDimensions (LxW): 69 × 50 mmOperating Voltage 7 to 32 VDCEngineered and manufactured in Germany Manual DMA-15 (EN) Sample Programs miCon-L and KEIL® 3D-Data (PDF and STEP)

From €161.00*
lococube® Motor Controller MC-800
Ultracompact CAN Motor ControllerSuitable for all bipolar Stepper Motors up to 2.8ANo Programming necessaryParameter communication via CANDynamic motor current adjustment via CANSpeed and ramps freely configurableStep mode dynamically adjustableInputs for Encoder and Limit SwitchesWide Operating Voltage Range 7 to 32VDCCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x18mmWeight: 50g Manual MC-800 (EN) Sample Project miCon-L MC-800 for STG-800

From €102.00*
lococube® CAN Gateway GT-900
Ultra compact CAN-FD Gateway2x CAN 2.0A/B / CAN-FD1x RS-2321x 1-Wire®Powerful ARM® Cortex® processorGreat expansion module for all lococube® mini-PLCWide operating voltage range 7 - 32 VDCParameter communication via CANOpen source programmingNo miCon-L supportCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual GT-900 [EN] Sample programs STM32CubeIDE® for GT-900

From €90.00*
lococube® IoT Gateway GT-800
Great Expansion Module for all lococube® mini-PLCsNo Programming necessaryParameter Communication via CANSupports CAN/CANOpen®, J1939 and NMEA200Wide Operating Voltage Range 7 to 32VDCCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual GT-800 (EN)

From €101.00*