Go to homepage
0

lococube® CAN Gateway GT-900

slide 2 of 4
slide 1 to 4 of 4
Quantity Unit price
To 9
€123.00*
To 49
€115.00*
To 99
€110.00*
To 249
€104.00*
From 250
€90.00*

Prices excl. VAT plus shipping costs

Available, delivery time: 1-2 weeks *

Product number: 0895-0900
Manufacturer: BARTH® Elektronik GmbH
EAN: 4251329406035
Product information "lococube® CAN Gateway GT-900"
  • Ultra compact CAN-FD Gateway
  • 2x CAN 2.0A/B / CAN-FD
  • 1x RS-232
  • 1x 1-Wire®
  • Powerful ARM® Cortex® processor
  • Great expansion module for all lococube® mini-PLC
  • Wide operating voltage range 7 - 32 VDC
  • Parameter communication via CAN
  • Open source programming
  • No miCon-L support
  • CE, UKCA, and RoHS certified
  • Engineered and manufactured in Germany
  • Dimensions (LxWxH): 60x45x15mm
  • Weight: 50g
1-Wire Interface: 1
CAN-FD Interface: 2
CAN Interface: 2
RS-232 Interface: 1
RS-485 Interface: 0

Open source programming

slide 1 to 2 of 2
New
Connection Cable VK-46
Connection Cable VK-46
Replaces VK-16 & ST-LINK v2 ISOL + VK-35 for the PLCs listed below!For lococube® miCon-L & open source programmingTTL232 -> USBISP -> USBCompatible with the following BARTH® lococube® mini-PLCs:STG-500, STG-700, STG-800, STG-810, STG-820, STG-850, STG-950, MC-800, GT-800, GT-900, GT-950Incl. STLINK-V3MINIE + USB-C cable (0.3 m) Manua VK-46 (EN)

€59.00*
New
Harness KS-85
Harness KS-85
You always get right down to business? No time to waste? We hear you! This harness lets you jump straight into development: Easily connect two BARTH-devices to each other and a power supplyCAN lines are properly terminated (60 Ohm) out of the box. The termination resistor can be unplugged easily & reversiblyClip-on connectors allow for easy connection of your own hardware, test equipment or another harness (KS-85 or otherIncl. power supply 25 W, 12 V, 2.08 A Manual KS-85 (EN)

€69.00*

CANtastic combinations

slide 9 to 13 of 10
lococube SPS Steuerung STG-800 im Winkel
lococube® mini-PLC STG-800
High-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 25 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Comprehensive Fail Safe FunctionsProgrammable Status LEDTTL-232 3.3V InterfaceIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Wide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UKCA, ECE-R10, UL, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-800/STA-800 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Arm Legacy Compiler v5 Guide (EN) Sample Programs KEIL® for STG-800 3D-Data (PDF and STEP)

From €87.00*
Details
lococube® CAN Display DMA-15
lococube® CAN Display DMA-15
Tiny and compact CAN DisplayColor Touch TFT 2.4“ 240×320pWhite LED BacklightDesign Template Selection via CANNo Programming necessaryOpen Source Programming OptionCompatible with all CAN lococubes®´sFront IP65 Protection Grade (option)Panel-Mount without visible ScrewsPanel Cut-Out (LxW): 60 × 45 mmDimensions (LxW): 69 × 50 mmOperating Voltage 7 to 32 VDCEngineered and manufactured in Germany Manual DMA-15 (EN) Sample Programs miCon-L and KEIL® 3D-Data (PDF and STEP)

From €161.00*
Details
lococube Motorcontroller MC-800 im Winkel
lococube® Motor Controller MC-800
Ultracompact CAN Motor ControllerSuitable for all bipolar Stepper Motors up to 2.8ANo Programming necessaryParameter communication via CANDynamic motor current adjustment via CANSpeed and ramps freely configurableStep mode dynamically adjustableInputs for Encoder and Limit SwitchesWide Operating Voltage Range 7 to 32VDCCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x18mmWeight: 50g Manual MC-800 (EN) Sample Project miCon-L MC-800 for STG-800

From €102.00*
Details
lococube IoT CAN Gateway GT-800 im Winkel
lococube® IoT Gateway GT-800
Great Expansion Module for all lococube® mini-PLCsNo Programming necessaryParameter Communication via CANSupports CAN/CANOpen®, J1939 and NMEA200Wide Operating Voltage Range 7 to 32VDCCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual GT-800 (EN)

From €101.00*
Details
lococube SPS Steuerung STG-810 im Winkel
lococube® mini-PLC STG-810
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 25 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Optical IrDA/SIR Interface (Infrared)TTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-L Open Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-810 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Arm Legacy Compiler v5 Guide (EN) Sample Programs KEIL® for STG-810 3D-Data (PDF and STEP)

From €93.00*
Details

Mounting

slide 1 of 1
Bracket HA-30 for lococube®
Bracket HA-30 for lococube®
35mm DIN rail mounting setSuitable for all locoube® mini-PLC, motion and interfaceEasy and fast frontside mountingMaterial: stainless steel A2Suitable for: STG-800/810/820/850, STG-580/680, MC-800, GT-800

€3.20*
This website uses cookies to ensure the best experience possible. More information...