lococube® IoT Gateway GT-800

Product information "lococube® IoT Gateway GT-800 "
  • Great Expansion Module for all lococube® mini-PLCs
  • No Programming necessary
  • Parameter Communication via CAN
  • Supports CAN/CANOpen®, J1939 and NMEA200
  • Wide Operating Voltage Range 7 to 32VDC
  • Engineered and manufactured in Germany
  • Dimensions (LxWxH): 60x45x15mm
  • Weight: 50g
CAN-FD Interface: 0
CAN Interface: 1
MQTT: yes
Node RED: yes
WLAN: yes

Open source programming

Programmer ST-Link/V2 ISOL
For lococube® STG-8xx Open Source ProgrammingIntegrated opto-IsolationConnection Cable VK-35 is mandatory

€99.00*
Connection Cable VK-35
For lococube® Open Source Programming with ST-LinkSuitable for all STG-8xx and DMA-xxLength: 180 mm

€19.00*
Harness KS-85
You always get right down to business? No time to waste? We hear you! This harness lets you jump straight into development: Easily connect two BARTH-devices to each other and a power supply (sold seperately)CAN lines are properly terminated (60 Ohm) out of the box. The termination resistor can be unplugged easily & reversiblyClip-on connectors allow for easy connection of your own hardware, test equipment or another harness (KS-85 or other)

€69.00*
lococube® mini-PLC STG-800
High-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 25 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Comprehensive Fail Safe FunctionsProgrammable Status LEDTTL-232 3.3V InterfaceIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Wide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-800/STA-800 (DE) Manual STG-800/STA-800 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Sample Programs KEIL® for STG-800 3D-Data (PDF and STEP)

From €87.00*
lococube® mini-PLC STG-810
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 25 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Optical IrDA/SIR Interface (Infrared)TTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-L Open Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-810 (DE) Manual STG-810 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Sample Programs KEIL® for STG-810 3D-Data (PDF and STEP)

From €93.00*
lococube® mini-PLC STG-820
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 analog Output 0 to 5V up to 100kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Optical IrDA/SIR Interface (Infrared)TTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-820 (DE) Manual STG-820 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Sample Programs KEIL® for STG-800 3D-Data (PDF and STEP)

From €99.00*
lococube® mini-PLC STG-850
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®6 analog Inputs 0 to 30 VDC, 12 bit ADC4 digital InputsEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs8 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 1 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)IrDA/SIR InterfaceTTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 93x45x15mmWeight: 80g Manual STG-850 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Sample Programs KEIL® for STG-850 3D-Data (PDF and STEP)

From €104.00*
lococube® mini-PLC STG-700
2 analog Inputs 0 to 30 VDC, 12 bit ADC2 digital Inputs up to 1 kHz4 Power Outputs up to 1.5 A1 CAN 2.0A/B InterfaceStepper Motor Output 1.5A bipolarReliable Solid-State OutputsFail Safe OscillatorProgrammable Status LEDTTL-232/USB Connection to PCIntuitive graphical Programming CapabilityWide Operating Voltage Range 8 to 32 VDCWide Operating Temp. Range -40 to +50°CVibration resistant and rugged SealingProtection Grade IP 66Engineered and manufactured in GermanyDimensions (LxWxH): 58x64x32mmWeight: 180g Manual STG-700 (EN)

From €157.00*
lococube® CAN Gateway GT-900
The lococube® CAN Gateway GT-900 is a compact gateway with the following hardware capabilities: - CAN2.0A/B - CAN-FD - RS-232 - 1-Wire The software for this product is to be configured and tested by the customer. Please contact us if you're interesting in this product! Manual GT-900 [EN] Sample Programs KEIL® and STM32CubeIDE® for GT-900

From €90.00*
lococube® CAN Gateway GT-950
The lococube® CAN Gateway GT-950 is a compact gateway with the following hardware capabilities: - CAN2.0A/B - CAN-FD - RS-485 The software for this product is to be configured and tested by the customer. Please contact us if you're interesting in this product! Manual STG-950 [Manual] Sample Programs KEIL® and STM32CubeIDE® for GT-950

From €93.00*
lococube® mini-PLC STG-950
Highly flexible mini-PLC for OEM solutionsConnector for customer-tailored AddOn BoardHigh-Performance 32 Bit ARM® Cortex® M43 analog Inputs 0 to 30/0 to 10 VDC, 12 bit ADC2 digital Inputs up to 25 kHz4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit up to 25 kHzCAN 2.0A/B InterfaceCAN FD, CANopen® and SAE J1939 Interface (no native miCon-L support!)Comprehensive Fail Safe FunctionsOpen Source ‚C‘ ProgrammingWide Operating Voltage Range 7 to 55 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certified (in progress)Engineered and manufactured in GermanyDimensions (LxWxH): 93x45x15mmWeight: 80gAddOn Board Functions (Coming soon!)Current input / output 4-20 mAVoltage input / output 0-10 VPT100 / PT1000Measuring bridges for pressure, weighting, temperatureGalvanically isolated inputs / outputsGalvanically isolated CAN / CAN-FD busRS-232 and RS-485MODBUS1-Wire®IO-Link® Manual STG-950 [EN] Sample Programs KEIL® and STM32CubeIDE® for STG-950

From €115.00*

CANtastic combinations

lococube® mini-PLC STG-800
High-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 25 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Comprehensive Fail Safe FunctionsProgrammable Status LEDTTL-232 3.3V InterfaceIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Wide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-800/STA-800 (DE) Manual STG-800/STA-800 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Sample Programs KEIL® for STG-800 3D-Data (PDF and STEP)

From €87.00*
lococube® CAN Gateway GT-900
The lococube® CAN Gateway GT-900 is a compact gateway with the following hardware capabilities: - CAN2.0A/B - CAN-FD - RS-232 - 1-Wire The software for this product is to be configured and tested by the customer. Please contact us if you're interesting in this product! Manual GT-900 [EN] Sample Programs KEIL® and STM32CubeIDE® for GT-900

From €90.00*
lococube® Motor Controller MC-800
Ultracompact CAN Motor ControllerSuitable for all bipolar Stepper Motors up to 2.8ANo Programming necessaryParameter communication via CANDynamic motor current adjustment via CANSpeed and ramps freely configurableStep mode dynamically adjustableOpen-Loop or closed-Loop OperationInputs for Encoder and Limit SwitchesWide Operating Voltage Range 7 to 32VDCEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x18mmWeight: 50g Manual MC-800 (EN) Sample Project miCon-L MC-800

From €102.00*
lococube® CAN Display DMA-15
Tiny and compact CAN DisplayColor Touch TFT 2.4“ 240×320pWhite LED BacklightDesign Template Selection via CANNo Programming necessaryOpen Source Programming OptionCompatible with all CAN lococubes®´sFront IP65 Protection Grade (option)Panel-Mount without visible ScrewsPanel Cut-Out (LxW): 60 × 45 mmDimensions (LxW): 69 × 50 mmOperating Voltage 7 to 32 VDCEngineered and manufactured in Germany Manual DMA-15 (EN) Sample Programs miCon-L and KEIL® 3D-Data (PDF and STEP)

From €161.00*
lococube® mini-PLC STG-810
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 25 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Optical IrDA/SIR Interface (Infrared)TTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-L Open Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-810 (DE) Manual STG-810 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Sample Programs KEIL® for STG-810 3D-Data (PDF and STEP)

From €93.00*
lococube® mini-PLC STG-820
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 analog Output 0 to 5V up to 100kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Optical IrDA/SIR Interface (Infrared)TTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-820 (DE) Manual STG-820 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Sample Programs KEIL® for STG-800 3D-Data (PDF and STEP)

From €99.00*
lococube® mini-PLC STG-850
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®6 analog Inputs 0 to 30 VDC, 12 bit ADC4 digital InputsEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs8 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 1 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)IrDA/SIR InterfaceTTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 93x45x15mmWeight: 80g Manual STG-850 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Sample Programs KEIL® for STG-850 3D-Data (PDF and STEP)

From €104.00*
lococube® mini-PLC STG-950
Highly flexible mini-PLC for OEM solutionsConnector for customer-tailored AddOn BoardHigh-Performance 32 Bit ARM® Cortex® M43 analog Inputs 0 to 30/0 to 10 VDC, 12 bit ADC2 digital Inputs up to 25 kHz4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit up to 25 kHzCAN 2.0A/B InterfaceCAN FD, CANopen® and SAE J1939 Interface (no native miCon-L support!)Comprehensive Fail Safe FunctionsOpen Source ‚C‘ ProgrammingWide Operating Voltage Range 7 to 55 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certified (in progress)Engineered and manufactured in GermanyDimensions (LxWxH): 93x45x15mmWeight: 80gAddOn Board Functions (Coming soon!)Current input / output 4-20 mAVoltage input / output 0-10 VPT100 / PT1000Measuring bridges for pressure, weighting, temperatureGalvanically isolated inputs / outputsGalvanically isolated CAN / CAN-FD busRS-232 and RS-485MODBUS1-Wire®IO-Link® Manual STG-950 [EN] Sample Programs KEIL® and STM32CubeIDE® for STG-950

From €115.00*
Parameter Programmer PG-65
Easy Setup and Change of PLC ParametersWell suitable for lococube® STG-8xx SeriesExcellent for Field Service UseIntuitive graphical MenuCommunication via CAN or IrDAOpen Source InterfacesColor Touch Display 2.4“ 240×320pInternal Li-Ion Battery OperationUSB Power OperationExternal Power Operation 7 to 32 VDCRugged DesignAluminium Diecast HousingEngineered and manufactured in GermanyDimensions (LxWxH): 115x85x25mmWeight: 220g Manual PG-65 (EN)

From €330.00*
lococube® CAN Gateway GT-950
The lococube® CAN Gateway GT-950 is a compact gateway with the following hardware capabilities: - CAN2.0A/B - CAN-FD - RS-485 The software for this product is to be configured and tested by the customer. Please contact us if you're interesting in this product! Manual STG-950 [Manual] Sample Programs KEIL® and STM32CubeIDE® for GT-950

From €93.00*

Befestigung

Bracket HA-30 for lococube®
35mm DIN rail mounting setSuitable for all locoube® mini-PLC, motion and interfaceEasy and fast frontside mountingMaterial: stainless steel A2Suitable for: STG-800/810/820/850, STG-580/680, MC-800, GT-800

€3.20*