lococube® CAN Gateway GT-960

Product information "lococube® CAN Gateway GT-960"
  • Ultra compact CAN-FD Gateway 
  • 2x CAN 2.0A/B / CAN-FD 
  • 1x RS-232 
  • 1x RS-485
  • 1x 1-Wire®
  • Powerful ARM® Cortex® processor 
  • Great expansion module for all lococube® mini-PLC
  • Wide operating voltage range 7 - 32 VDC
  • Parameter communication via CAN 
  • Open source programming 
  • No miCon-L support
  • CE, UKCA, and RoHS certified
  • Engineered and manufactured in Germany 
  • Dimensions (LxWxH): 60x45x15mm 
  • Weight: 50g

Open source programming

New
Connection Cable VK-46
Replaces VK-16 & ST-LINK v2 ISOL + VK-35 for the PLCs listed below!For lococube® miCon-L & open source programmingTTL232 -> USBISP -> USBCompatible with the following BARTH® lococube® mini-PLCs:STG-500, STG-700, STG-800, STG-810, STG-820, STG-850, STG-950, MC-800, GT-800, GT-900, GT-950Incl. STLINK-V3MINIE + USB-C cable (0.3 m) Manua VK-46 (EN)

€59.00*
New
Harness KS-85
You always get right down to business? No time to waste? We hear you! This harness lets you jump straight into development: Easily connect two BARTH-devices to each other and a power supplyCAN lines are properly terminated (60 Ohm) out of the box. The termination resistor can be unplugged easily & reversiblyClip-on connectors allow for easy connection of your own hardware, test equipment or another harness (KS-85 or otherIncl. power supply 25 W, 12 V, 2.08 A

€69.00*

CANtastic combinations

lococube® mini-PLC STG-950
High-Performance 32 Bit ARM® Cortex® M43 analog Inputs 0 to 30/0 to 10 VDC, 12 bit ADC2 digital Inputs up to 25 kHz4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit up to 25 kHzCAN 2.0A/B InterfaceCAN FD, CANopen® and SAE J1939 Interface (no native miCon-L support!)Comprehensive Fail Safe FunctionsOpen Source ‚C‘ ProgrammingWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UKCA, ECE-R10 and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 93x45x15mmWeight: 80gAddOn Board Functions (Coming soon!)Current input / output 4-20 mAVoltage input / output 0-10 VPT100 / PT1000Measuring bridges for pressure, weighting, temperatureGalvanically isolated inputs / outputsGalvanically isolated CAN / CAN-FD busRS-232 and RS-485MODBUS1-Wire®IO-Link® Manual STG-950 [EN] Sample Programs KEIL® and STM32CubeIDE® for STG-950

From €115.00*
lococube® CAN Display DMA-15
Tiny and compact CAN DisplayColor Touch TFT 2.4“ 240×320pWhite LED BacklightDesign Template Selection via CANNo Programming necessaryOpen Source Programming OptionCompatible with all CAN lococubes®´sFront IP65 Protection Grade (option)Panel-Mount without visible ScrewsPanel Cut-Out (LxW): 60 × 45 mmDimensions (LxW): 69 × 50 mmOperating Voltage 7 to 32 VDCEngineered and manufactured in Germany Manual DMA-15 (EN) Sample Programs miCon-L and KEIL® 3D-Data (PDF and STEP)

From €161.00*
lococube® Motor Controller MC-800
Ultracompact CAN Motor ControllerSuitable for all bipolar Stepper Motors up to 2.8ANo Programming necessaryParameter communication via CANDynamic motor current adjustment via CANSpeed and ramps freely configurableStep mode dynamically adjustableInputs for Encoder and Limit SwitchesWide Operating Voltage Range 7 to 32VDCCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x18mmWeight: 50g Manual MC-800 (EN) Sample Project miCon-L MC-800 for STG-800

From €102.00*
lococube® CAN Gateway GT-900
Ultra compact CAN-FD Gateway2x CAN 2.0A/B / CAN-FD1x RS-2321x 1-Wire®Powerful ARM® Cortex® processorGreat expansion module for all lococube® mini-PLCWide operating voltage range 7 - 32 VDCParameter communication via CANOpen source programmingNo miCon-L supportCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual GT-900 [EN] Sample programs STM32CubeIDE® for GT-900

From €90.00*
lococube® IoT Gateway GT-800
Great Expansion Module for all lococube® mini-PLCsNo Programming necessaryParameter Communication via CANSupports CAN/CANOpen®, J1939 and NMEA200Wide Operating Voltage Range 7 to 32VDCCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual GT-800 (EN)

From €101.00*
lococube® mini-PLC STG-800
High-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 25 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Comprehensive Fail Safe FunctionsProgrammable Status LEDTTL-232 3.3V InterfaceIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Wide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UKCA, ECE-R10, UL, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-800/STA-800 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Arm Legacy Compiler v5 Guide (EN) Sample Programs KEIL® for STG-800 3D-Data (PDF and STEP)

From €86.00*
lococube® mini-PLC STG-810
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 25 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Optical IrDA/SIR Interface (Infrared)TTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-L Open Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UL und ECE-R10 certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-810 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Arm Legacy Compiler v5 Guide (EN) Sample Programs KEIL® for STG-810 3D-Data (PDF and STEP)

From €93.00*
lococube® mini-PLC STG-820
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®3 analog Inputs 0 to 30 VDC, 12 bit ADCEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs4 Solid-State Power Outputs up to 1.5 A1 analog Output 0 to 5V up to 100kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)Optical IrDA/SIR Interface (Infrared)TTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UKCA, ECE-R10, UL und RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual STG-820 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Arm Legacy Compiler v5 Guide (EN) Sample Programs KEIL® for STG-800 3D-Data (PDF and STEP)

From €99.00*
lococube® mini-PLC STG-850
Tiny and super-flat CAN Logic ControllerHigh-Performance 32 Bit ARM® Cortex®6 analog Inputs 0 to 30 VDC, 12 bit ADC4 digital InputsEvent Counter Input 25 kHzPulse and Frequency Counter Input 40µs8 Solid-State Power Outputs up to 1.5 A1 Power PWM Output 16 Bit 1 Hz to 1 kHzCAN 2.0A/B InterfaceCANopen® and SAE J1939 Interface (no native miCon-L support!)IrDA/SIR InterfaceTTL-232 3.3V InterfaceComprehensive Fail Safe FunctionsIntuitive graphical Programming Capability with miCon-LOpen Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source” programming and that we cannot release this firmware!)Compatible with PG-65 ProgrammerWide Operating Voltage Range 7 to 32 VDCWide Operating Temp. Range -40 to +70°CVibration resistant and rugged SealingCE, UKCA, ECE-R10, UL und RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 93x45x15mmWeight: 80g Manual STG-850 (EN) Programming Manual miCon-L (EN) Programming Manual KEIL® (EN) Arm Legacy Compiler v5 Guide (EN) Sample Programs KEIL® for STG-850 3D-Data (PDF and STEP)

From €104.00*
lococube® mini-PLC STG-700
2 analog Inputs 0 to 30 VDC, 12 bit ADC2 digital Inputs up to 1 kHz4 Power Outputs up to 1.5 A1 CAN 2.0A/B InterfaceStepper Motor Output 1.5A bipolarReliable Solid-State OutputsFail Safe OscillatorProgrammable Status LEDTTL-232/USB Connection to PCIntuitive graphical Programming CapabilityWide Operating Voltage Range 8 to 32 VDCWide Operating Temp. Range -40 to +50°CVibration resistant and rugged SealingProtection Grade IP 66CE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 58x64x32mmWeight: 180g Manual STG-700 (EN)

From €157.00*
lococube® CAN Display DMA-20
Universal CAN DisplayColor Touch TFT 2.4“ 240×320pLED BacklightDesign Template Selection via CANNo Programming necessaryOpen Source Programming OptionCompatible with all CAN lococube®´sIntegrated Piezo SpeakerFront IP65 Protection Grade (option)Panel-Mount without visible ScrewsPanel Cut-Out (LxW): 106 × 78 mmDimensions (LxW): 115 × 85 mmOperating Voltage 7 to 32 VDCEngineered and manufactured in GermanyDimensions (LxWxT): 115x85x41mmPanel cut-out (LxW): 106x78mmWeight: 200g Manual DMA-20 (EN) Sample Projects miCon-L and C for DMA-15

From €146.00*
Parameter Programmer PG-65
Easy Setup and Change of PLC ParametersWell suitable for lococube® STG-8xx SeriesExcellent for Field Service UseIntuitive graphical MenuCommunication via CAN or IrDAOpen Source InterfacesColor Touch Display 2.4“ 240×320pInternal Li-Ion Battery OperationUSB Power OperationExternal Power Operation 7 to 32 VDCRugged DesignAluminium Diecast HousingEngineered and manufactured in GermanyDimensions (LxWxH): 115x85x25mmWeight: 220g Manual PG-65 (EN)

From €330.00*

Mounting

Bracket HA-30 for lococube®
35mm DIN rail mounting setSuitable for all locoube® mini-PLC, motion and interfaceEasy and fast frontside mountingMaterial: stainless steel A2Suitable for: STG-800/810/820/850, STG-580/680, MC-800, GT-800

€3.20*