Go to homepage
0

lococube® mini-PLC STG-800

slide 2 of 5
slide 1 to 5 of 5
Quantity Unit price
To 99
€100.00*
To 249
€91.00*
From 250
€87.00*

Prices excl. VAT plus shipping costs

Available, delivery time: 2-5 days *

Product number: 0850-0800
Manufacturer: BARTH® Elektronik GmbH
EAN: 4251329401207
Product information "lococube® mini-PLC STG-800 "
  • High-Performance 32 Bit ARM® Cortex®
  • 3 analog Inputs 0 to 30 VDC, 12 bit ADC
  • Event Counter Input 25 kHz
  • Pulse and Frequency Counter Input 40µs
  • 4 Solid-State Power Outputs up to 1.5 A
  • 1 Power PWM Output 16 Bit 1 Hz to 25 kHz
  • CAN 2.0A/B Interface
  • CANopen® and SAE J1939 Interface (no native miCon-L support!)
  • Comprehensive Fail Safe Functions
  • Programmable Status LED
  • TTL-232 3.3V Interface
  • Intuitive graphical Programming Capability with miCon-L
  • Open Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source”
    programming and that we cannot release this firmware!    )
  • Wide Operating Voltage Range 7 to 32 VDC
  • Wide Operating Temp. Range -40 to +70°C
  • Vibration resistant and rugged Sealing
  • CE, UKCA, ECE-R10, UL, and RoHS certified
  • Engineered and manufactured in Germany
  • Dimensions (LxWxH): 60x45x15mm
  • Weight: 50g

Analog Input: 3
Analog Output: 0
CAN Interface: 1
Digital Input: 2
Digital Output: 4
IrDA Interface: 0
PWM Output: 1

miCon-L & open source programming

slide 1 to 2 of 2
New
Connection Cable VK-46
Connection Cable VK-46
Replaces VK-16 & ST-LINK v2 ISOL + VK-35 for the PLCs listed below!For lococube® miCon-L & open source programmingTTL232 -> USBISP -> USBCompatible with the following BARTH® lococube® mini-PLCs:STG-500, STG-700, STG-800, STG-810, STG-820, STG-850, STG-950, MC-800, GT-800, GT-900, GT-950Incl. STLINK-V3MINIE + USB-C cable (0.3 m) Manua VK-46 (EN)

€59.00*
New
Harness KS-85
Harness KS-85
You always get right down to business? No time to waste? We hear you! This harness lets you jump straight into development: Easily connect two BARTH-devices to each other and a power supplyCAN lines are properly terminated (60 Ohm) out of the box. The termination resistor can be unplugged easily & reversiblyClip-on connectors allow for easy connection of your own hardware, test equipment or another harness (KS-85 or otherIncl. power supply 25 W, 12 V, 2.08 A Manual KS-85 (EN)

€69.00*

CANtastic combinations

slide 8 to 12 of 12
lococube® CAN Display DMA-15
lococube® CAN Display DMA-15
Tiny and compact CAN DisplayColor Touch TFT 2.4“ 240×320pWhite LED BacklightDesign Template Selection via CANNo Programming necessaryOpen Source Programming OptionCompatible with all CAN lococubes®´sFront IP65 Protection Grade (option)Panel-Mount without visible ScrewsPanel Cut-Out (LxW): 60 × 45 mmDimensions (LxW): 69 × 50 mmOperating Voltage 7 to 32 VDCEngineered and manufactured in Germany Manual DMA-15 (EN) Sample Programs miCon-L and KEIL® 3D-Data (PDF and STEP)

From €161.00*
Details
lococube Motorcontroller MC-800 im Winkel
lococube® Motor Controller MC-800
Ultracompact CAN Motor ControllerSuitable for all bipolar Stepper Motors up to 2.8ANo Programming necessaryParameter communication via CANDynamic motor current adjustment via CANSpeed and ramps freely configurableStep mode dynamically adjustableInputs for Encoder and Limit SwitchesWide Operating Voltage Range 7 to 32VDCCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x18mmWeight: 50g Manual MC-800 (EN) Sample Project miCon-L MC-800 for STG-800

From €102.00*
Details
lococube IoT CAN Gateway GT-800 im Winkel
lococube® IoT Gateway GT-800
Great Expansion Module for all lococube® mini-PLCsNo Programming necessaryParameter Communication via CANSupports CAN/CANOpen®, J1939 and NMEA200Wide Operating Voltage Range 7 to 32VDCCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual GT-800 (EN)

From €101.00*
Details
lococube FDCAN Gateway GT-900 im Winkel
lococube® CAN Gateway GT-900
Ultra compact CAN-FD Gateway2x CAN 2.0A/B / CAN-FD1x RS-2321x 1-Wire®Powerful ARM® Cortex® processorGreat expansion module for all lococube® mini-PLCWide operating voltage range 7 - 32 VDCParameter communication via CANOpen source programmingNo miCon-L supportCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual GT-900 [EN] Sample programs STM32CubeIDE® for GT-900

From €90.00*
Details
lococube® CAN Display DMA-20
lococube® CAN Display DMA-20
Universal CAN DisplayColor Touch TFT 2.4“ 240×320pLED BacklightDesign Template Selection via CANNo Programming necessaryOpen Source Programming OptionCompatible with all CAN lococube®´sIntegrated Piezo SpeakerFront IP65 Protection Grade (option)Panel-Mount without visible ScrewsPanel Cut-Out (LxW): 106 × 78 mmDimensions (LxW): 115 × 85 mmOperating Voltage 7 to 32 VDCEngineered and manufactured in GermanyDimensions (LxWxT): 115x85x41mmPanel cut-out (LxW): 106x78mmWeight: 200g Manual DMA-20 (EN) Sample Projects miCon-L and C for DMA-15

From €146.00*
Details

Mounting

slide 1 of 1
Bracket HA-30 for lococube®
Bracket HA-30 for lococube®
35mm DIN rail mounting setSuitable for all locoube® mini-PLC, motion and interfaceEasy and fast frontside mountingMaterial: stainless steel A2Suitable for: STG-800/810/820/850, STG-580/680, MC-800, GT-800

€3.20*
This website uses cookies to ensure the best experience possible. More information...