Go to homepage
0

lococube® mini-PLC STG-850

slide 2 of 5
Quantity Unit price
To 9
€150.00*
To 49
€138.00*
To 99
€127.00*
To 249
€114.00*
From 250
€104.00*

Prices excl. VAT plus shipping costs

Product number: 0850-0850
Manufacturer: BARTH® Elektronik GmbH
EAN: 4251329401443
Product information "lococube® mini-PLC STG-850 "
  • Tiny and super-flat CAN Logic Controller
  • High-Performance 32 Bit ARM® Cortex®
  • 6 analog Inputs 0 to 30 VDC, 12 bit ADC
  • 4 digital Inputs
  • Event Counter Input 25 kHz
  • Pulse and Frequency Counter Input 40µs
  • 8 Solid-State Power Outputs up to 1.5 A
  • 1 Power PWM Output 16 Bit 1 Hz to 1 kHz
  • CAN 2.0A/B Interface
  • CANopen® and SAE J1939 Interface (no native miCon-L support!)
  • IrDA/SIR Interface
  • TTL-232 3.3V Interface
  • Comprehensive Fail Safe Functions
  • Intuitive graphical Programming Capability with miCon-L
  • Open Source ‚C‘ Programming (Please note that the miCon-L firmware is irreversibly overwritten by “open source”
    programming and that we cannot release this firmware!    )
  • Compatible with PG-65 Programmer
  • Wide Operating Voltage Range 7 to 32 VDC
  • Wide Operating Temp. Range -40 to +70°C
  • Vibration resistant and rugged Sealing
  • CE, UKCA, ECE-R10, UL und RoHS certified
  • Engineered and manufactured in Germany
  • Dimensions (LxWxH): 93x45x15mm
  • Weight: 80g


Analog Input: 6
Analog Output: 0
CAN Interface: 1
Digital Input: 4
Digital Output: 9
IrDA Interface: 1
PWM Output: 1

miCon-L & open source programming

slide 1 to 2 of 2
New
Connection Cable VK-46
Connection Cable VK-46
Replaces VK-16 & ST-LINK v2 ISOL + VK-35 for the PLCs listed below!For lococube® miCon-L & open source programmingTTL232 -> USBISP -> USBCompatible with the following BARTH® lococube® mini-PLCs:STG-500, STG-700, STG-800, STG-810, STG-820, STG-850, STG-950, MC-800, GT-800, GT-900, GT-950Incl. STLINK-V3MINIE + USB-C cable (0.3 m) Manua VK-46 (EN)

€59.00*
New
Harness KS-85
Harness KS-85
You always get right down to business? No time to waste? We hear you! This harness lets you jump straight into development: Easily connect two BARTH-devices to each other and a power supplyCAN lines are properly terminated (60 Ohm) out of the box. The termination resistor can be unplugged easily & reversiblyClip-on connectors allow for easy connection of your own hardware, test equipment or another harness (KS-85 or otherIncl. power supply 25 W, 12 V, 2.08 A Manual KS-85 (EN)

€69.00*

CANtastic combinations

slide 7 to 11 of 13
lococube Motorcontroller MC-800 im Winkel
lococube® Motor Controller MC-800
Ultracompact CAN Motor ControllerSuitable for all bipolar Stepper Motors up to 2.8ANo Programming necessaryParameter communication via CANDynamic motor current adjustment via CANSpeed and ramps freely configurableStep mode dynamically adjustableInputs for Encoder and Limit SwitchesWide Operating Voltage Range 7 to 32VDCCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x18mmWeight: 50g Manual MC-800 (EN) Sample Project miCon-L MC-800 for STG-800

From €102.00*
Details
lococube® CAN Display DMA-15
lococube® CAN Display DMA-15
Tiny and compact CAN DisplayColor Touch TFT 2.4“ 240×320pWhite LED BacklightDesign Template Selection via CANNo Programming necessaryOpen Source Programming OptionCompatible with all CAN lococubes®´sFront IP65 Protection Grade (option)Panel-Mount without visible ScrewsPanel Cut-Out (LxW): 60 × 45 mmDimensions (LxW): 69 × 50 mmOperating Voltage 7 to 32 VDCEngineered and manufactured in Germany Manual DMA-15 (EN) Sample Programs miCon-L and KEIL® 3D-Data (PDF and STEP)

From €161.00*
Details
lococube FDCAN Gateway GT-900 im Winkel
lococube® CAN Gateway GT-900
Ultra compact CAN-FD Gateway2x CAN 2.0A/B / CAN-FD1x RS-2321x 1-Wire®Powerful ARM® Cortex® processorGreat expansion module for all lococube® mini-PLCWide operating voltage range 7 - 32 VDCParameter communication via CANOpen source programmingNo miCon-L supportCE, UKCA, and RoHS certifiedEngineered and manufactured in GermanyDimensions (LxWxH): 60x45x15mmWeight: 50g Manual GT-900 [EN] Sample programs STM32CubeIDE® for GT-900

From €90.00*
Details
Parameter Programmer PG-65
Parameter Programmer PG-65
Easy Setup and Change of PLC ParametersWell suitable for lococube® STG-8xx SeriesExcellent for Field Service UseIntuitive graphical MenuCommunication via CAN or IrDAOpen Source InterfacesColor Touch Display 2.4“ 240×320pInternal Li-Ion Battery OperationUSB Power OperationExternal Power Operation 7 to 32 VDCRugged DesignAluminium Diecast HousingEngineered and manufactured in GermanyDimensions (LxWxH): 115x85x25mmWeight: 220g Manual PG-65 (EN)

From €330.00*
Details
lococube CAN Gateway GT-950 im Winkel
lococube® CAN Gateway GT-950
Ultra compact CAN-FD Gateway 2x CAN 2.0A/B / CAN-FD 1x RS-232 1x RS-485 Powerful ARM® Cortex® processor Great expansion module for all lococube® mini-PLC Wide operating voltage range 7 - 32 VDCParameter communication via CAN Open source programming No miCon-L support CE, UKCA, and RoHS certifiedEngineered and manufactured in Germany Dimensions (LxWxH): 60x45x15mm Weight: 50g Manual STG-950 [Manual] Sample Programs STM32CubeIDE® for GT-950

From €93.00*
Details

Mounting

slide 1 of 1
Bracket HA-18 for lococube®
Bracket HA-18 for lococube®
35mm DIN Rail Mounting BracketIdeal for Cabinet MountingBoth horizontal and vertical OrientationSolid PMMA Mounting PlateScrews for lococube® includedSuitable for: STG-650/680/850 3D Data (PDF and STEP)

€9.50*
This website uses cookies to ensure the best experience possible. More information...